|
|
How To Gas-Weld Aluminum by Ron Fournier covers essential equipment, methods and benefits of tack-welding, fitting and joint preparation, and how to produce fusion-type welds with lipping, butt-welds and tank corner welds. Demonstrations of straight welds, corners and curved sections are included in this instructional film.
Note: This DVD is also included in our DHC2000 (Cobra) Welding Torch Kit!
|
30.00 |
|
|
A comprehensive overview to the "Hand Tools" of the Trade!
This tape covers: hammers, dollies, shot bags, measuring tools, glass pliers, aviation snips, tinner's snips and hand seamers.
Other essential hand tools like hole saws and Greenlee knock-out punches are demonstrated. How to use Pro-flanges to make lightening holes.
90 min., DVD
|
35.00 |
|
|
Planishing hammers are a real 'workhorse' of the metal shaping process. They are unexcelled for flattening welds, working in constricted areas, and stretching flanges. Ron demonstrates the basic procedures for using these machines, including proper die selection and operator technique, and he shows their use on both steel and aluminum panels.
More specialized techniques are covered too, including flanging, riveting, and making reverse curves. This program shows seven different planishing hammers in action, from bargain-priced entry-level machines, through vintage and hand-held machines, to the most robust professional-level machines available, giving the viewer invaluable insight about the great diversity of these machines, and which features are most important for specific types of work.
As popular as planishing hammers are, there is precious little information available on their proper use, and this program will give you a strong foundation for selecting and using the right machine and tooling for your application.
54 min., #1000-29
|
40.00 |
|
|
Instruction and demonstration on essential sheet metal equipment. It's a classic Fournier video!
In this video Ron explains and demonstrates the benefits of various sheetmetal bending machines, slip roll and beading tools.
Many tricks of the trade are shown when working with a drill press, band saw and other power tools.
Also includes instruction on how to use a radius die and how to roll a cylinder & cone. Ron teaches by example and shows how to use the combination rotary machine, box and pan brakes and disc sander.
90 min., DVD #LED00
|
35.00 |
|
|
This program covers many advanced topics in TIG welding, including welding chrome moly steel, stainless steel, aluminum, magnesium, bronze, copper, and titanium. You’ll also learn how to weld castings made from aluminum, magnesium, and bronze. Clear guidelines are given for using the pulse and waveform adjustments that many new welders have, along with great practical advice on machine setup, joint preparation, and weld finishing.
Ron’s clear and detailed instructions are easy to follow, and the striking close-up photography shows you exactly what to look for as you weld!
111 min., #1000-25
|
40.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application.
|
80.00 |
|
|
Learn how to gas-weld aluminum the easy way! Our signature kit provides you with the correct materials and step-by-step instructions and photos.
KIT CONTAINS:
8-oz. container AMCO 22 aluminum welding flux,
1 lb. 1/16", 1100 aluminum rod,
Stainless steel wire brush
Instructional welding DVD, How to Gas-Weld Aluminum, by Ron Fournier.
Brush for flux application, and;
Standard kit - WELDING LENS, OR;
Upgraded kit - WELDING GLASSES (Addtl. $4.25), OR the WELDING GOGGLES (Addtl. $9.35)
# GWK02
|
90.00 |
|
|
Metal Finishing
Weld finishing and final planishing are achieved with some of the metal working "tools of the trade"
|
|
|
Ron Covell demonstrates dozens of ways to work with tubing, including bending with heat, bending with tube bending machines (both inexpensive and high-end machines), mitering, flaring and tapering tubing.
An extensive section deals with using U-bends, showing how to create anything from simple water pipes to elaborate headers.
One of Ron's most popular videos ~ great information communicated concisely with lots of close up shots!
DVD, 95 min., #WTV01 (1000-4)
|
40.00 |
|
|
Ron shows and explains a variety of bucks. Step-by-step demonstration on building a sectional fender buck. Additional topics include: material & fastening recommendations, determining the frequency of stations, construction differences between single use and low-production bucks.
60 min. DVD, BPD00
|
30.00 |
|
| |
|