|
|
Our DEEP REACH anvil is perfect for wheeling in confined areas! Also especially helpful for for making small shapes, such as the tight end of a tear drop blister. It's also great for turning an edge.
Makes an otherwise tricky job a snap! It's a great choice for important secondary operations that make the difference between getting that special project 'done' and 'done right'!
Overall size is 2" wide x 3-½" in diameter with a raised 3/4" rad. center section. The shoulder dia. is 1-5/8" to allow maximum clearance. Anvil has pressed-in sealed bearings and a ½" steel axle.
Note: Compatible with Fournier QuickShaper & QuickShaper Mark II
MADE IN USA
|
105.00 |
|
|
Our EDGING anvil is perfect for surface clean up. Use this optional anvil for a professional final finish to remove dents or low spots directly next to an angle that has already been bent.
Makes an otherwise tricky job a snap! It's a great choice for important secondary operations that make the difference between getting that special project 'done' and 'done right'!
Edging anvil has an offset 3/4" wide flat surface with 1/16" rad. corners. Overall size is 2" wide x 3" in diameter with pressed-in sealed bearings and a ½" steel axle.
Note: Compatible with Fournier QuickShaper & QuickShaper Mark II English wheels
MADE IN USA
|
105.00 |
|
|
CLASSIC BOWL FORMING HEAD
The simple shape and clean design of the Classic Bowl result in one very useful tool for fabricators in nearly every arena of metalworking.
You'll find yourself reaching for this forming head time and time again, as you use it for every day shrinking and planishing operations in your shop!
Use the lower edge of the Classic Bowl with a Flat Slapper for effective shrinking. The top surface of the forming head provides a user-friendly gentle curve that's perfect for planishing.
This shape is also ideal for quickly forming bowls or other, similar shapes like the bottom of auto fenders or the front of a fuel tank. It's a great, multipurpose tool.
FORMING HEAD FEATURES:
Cast from malleable iron for long-term durability
6" mounting post
Note: this is the forming head included standard with the QuickShaper Mark II English wheel.
#MFH09, Made in USA
|
155.00 |
|
|
The GL2-DLX Planishing Hammer, by Eckold
Ideal for Planishing, Doming and Curving Sheet Metal
Considered one of the "most wanted" tools of professional workers, the Eckold GL2 portable planishing hammer is essential for cold forming sheet metal and aluminum.
The portable design increases flexibility by allowing you to take the tool to your work or your work to the tool! The elegant quick change tooling design helps expedite work and get the job done quicker.
A great tool for 'blocking' or rough-shaping your custom metal work creations!
A convenient and economical kit with everything offered for the Eckold Portable Planishing Hammer (GL2)
Includes:
air hammer,
5 steel inserts,
5 synthetic* inserts,
2 holding adapters, including a 12 degree swivel adapter (great for reaching into corners and edges!),
impact resistant tool box,
air fittings and hose.
This comprehensive shaping kit also includes 3 blank synthetic inserts which may be shaped to for special applications.
Hammerforming Techniques DVD, by Ron Covell and Ron Fournier, 76 min.
Synthetic inserts have been specially designed to reduce the risk of marking the surface of light metal panels.
ALSO INCLUDED WITH PURCHASE: "Hammerforming Techniques" DVD, with Ron Covell & Ron Fournier. Watch & learn as this elegant tool is put to use in the film, along with many other invaluable hammerforming techniques.
|
5250.00 |
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
|
The QuickSpaper Mark II combines a 32" throat English wheel with multiple workstations to perform a variety of essential metal shaping tasks!
Multi-Station Work Center designed by Ron Fournier...
The QuickShaper is a multitask metal working machine designed for metal work professionals and hobbyists alike. Ideal for small shops, where space - & time - are at a premium. The QuickShaper™ Mark II combines a 32" throat English wheel, with multiple workstations to perform...
Every essential metal shaping task:
Hammering / Blocking to pre-form custom aluminum or steel parts;
Wheeling and raising metal panels;
Shrinking or stretching;
Planishing - Perfect for small to medium sized parts like motorcycle tanks, hood scoops, fender flares and door skins. Now, even large parts are easily accommodated on this deeper throat wheel!
Every craftsman deserves flexibility and options to enhance creativity...
Our mobile forming center fits comfortably into small workspaces and is easily navigated around the shop. A variety of tasks may be performed right at the work station and the well-planned design provides convenient storage for forming accessories. It includes a generous 32" throat English wheel, and the upper wheel and anvil can be turned 90° to shape larger parts, as needed.
The QuickShaper provides an effective way to quickly form custom shapes in aluminum & steel. It's a multitask tool that enhances productivity for truly professional results!
Features:
32" English wheel ~ foot activated.
The upper portion of the QuickShaper is a 32" throat English wheel with 90 degree rotation feature for shaping larger parts and panels;
Quick release cam mechanism on the upper anvil.
Benefit: when placed back into operating position, the original pressure setting is immediately reestablished for streamlined shaping and efficiency;
6 forming anvils standard for a well equipped English wheel. Anvils are CNC'ed & polished;
Anvil Dimensions:
Each anvil is 2" wide x 2-½" in diameter with pressed-in sealed bearings and a ½" steel axle. Anvils are individually numbered 0 - 5, indicating the amount of crown, as follows:
#0, Completely flat, no crown
#1, 3/4" contact area
#2, 1/2" contact area
#3, 3/8" contact area.
#4, 1/4" contact area
#5, 1/8" contact area
Upper wheel:
The upper wheel is 2" wide x 4-1/2" in diameter. It also has pressed-in sealed bearings and a 1/2" steel axle. This upper wheel comes highly polished (nearly a mirror finish), which will produce parts with a beautiful surface.
Built for longevity and quality results:
Anvils are 8620 steel with deep case harden .015"-.020", 58-60 HRc
Custom lower storage area for extra forming heads, tools and equipment. Storage area accommodates storage of up to six Fournier forming heads around the perimeter of the tray;
Larger storage holes in upper tray to accommodate a variety of hammers & mallets of every size;
QuickShaper design summary:
Multi-Station design for efficient work space use and enhanced productivity;
Designed & manufactured by experts for maximum quality metal shaping results!
Made with pride in the USA;
Delivered assembled (less casters), ready for use.
Also includes EVEN MORE equipment you need for a complete metal shaping station:
Foot operated Lancaster Shrinker with interchangeable Lancaster Stretcher jaw;
Classic Bowl Forming Head;
Shot Bag 12" (unfilled);
2-¾" Plastic Bossing Mallet (# FBM02);
2-¾ Hickory Barrel Mallet (# MUM00);
Hard Wood Flat Slapper w/ leather face (# FFS001);
90 minute instructional DVD, Blocking & Smoothing, by Ron Fournier (# BSD00)
Review Set Up Instructions
WHEN ORDERING, PLEASE NOTE:
This equipment ships via motor freight only. The shipping charge for this item is ESTIMATED to be $300. (for destinations within the continental United States) Actual shipping is based on a variety of factors and will be calculated once your order is placed. Factory charges $50 crate fee, which is noted on the details of your shipping estimate.
You will be contacted with actual shipping prior to shipment and billed for shipping, separately.
QuickShaper Mark II # FQSM2
SHIPS TRUCK FREIGHT, 665 lbs., class 85
Price does not include sales tax, if applicable. (MI residents, 6%)
QuickShaper Mark II # FQSM2
|
5500.00 |
|
|
Eckold Metal Forming Tools
Eckold tools are available for shrinking, stretching, doming, planishing, flattening, straightening, flanging, notching, punching and edging of sheet metal parts!
|
|
|
Phone in an order before Wednesday March 4th for pickup at Detroit AutoRama. No ship charge and we will pay your sales tax! Order must be for an in-stock item, certain restrictions apply. Subject to weight and availability. Orders must be prepaid.
|
|
|
Featuring Ron Fournier & Ron Covell
Two of the best-known names in metalshaping have teamed up to teach you the ins and outs of the hammerforming process. The two Ron's bring over 70 years of combined experience to their viewers, and you will see how their individual styles of working with metal compliment each other.
Hammerforms are very easy to make, and they enable you to create parts that have the look and accuracy of die-stamped parts. Even beginning metalworkers can use hammerforms to quickly and easily make parts of which they can be proud.
Ten different hammerforming operations are demonstrated, from simple tank tops to a beautiful rolled edge detail on a complicated pontoon Bugatti fender.
The film includes instruction and demonstrations on the following topics:
Tank Top
Grille Bar
Annealing
Chipmunk Tombstone
Bowl Shapes
Flying Wire Fairing
Wing Rib
Door Post
Naca Duct
Bicycle Seat Post
Bugatti Fender
Featuring striking close-up shots that bring you close to the action, and clear descriptions of every aspect of the hammerforming process.
Length, 76 min. #HFD00 (1000-15)
|
10.00 |
|
|
Connects to Floor stand (200-031 and 200-150) to allow convenient access to and storage for bead rolls
For use with all high throat (4” throat) models: 204-24, 204-24NV, 204-36, 204-36NV
Made in USA
|
79.00 |
|
| |
|