|
|
1/8" PIN STRIPE, for Mittler Power Drive Bead Rollers
7/8" Spacing
Please note: The 1/8" Double Taper Pinstripe Roll Set, # 201-125-DPT:
The distance is 7/8" centerline from one bead to the centerline of the opposite bead. This Bead Roll Set is also designed with a taper to offset any deflection in the machine frame and/or roll shafts because of the wider roll blank needed with this type of narrow shallow bead profile. The outer bead profile will contact the metal at the same time as the inner bead profile.
MADE IN THE USA
|
135.00 |
|
|
Sheet Metal Machines
Traditional metal shaping machines like bead rollers, planishing hammers, brakes and English wheels are essential sheet metal shop equipment.
|
|
|
HD TUBE BEAD ROLL SET , for Mittler Power Drive Bead Rollers
Rolls a bead so hoses won't slip off
Make professional radiator and fuel line tubes.
Beads 1-¼" dia. tube & larger .
Perfect addition to a Mittler Power Bead Roller. Fits all power drive units.
MADE IN THE USA
|
160.00 |
|
|
A huge variety of bead rolls for use with all standard (1-1/8" throat) Mittler Brothers Bead Rollers! These rolls will fit models #: 210-24, 210-24NV, 200-36, 200-36NV, 200-42 AND 210-24M.
Select options from menu, above. "Standard" shape rolls are $65. Other optional rolls vary, as indicated next to roll description.
All bead rolls are Made in USA
|
75.00 |
|
|
HEM ROLL SET, for Mittler Power Drive Bead Rollers
SET INCLUDES:
STEP #1 Metal is formed 90°
STEP #2 Metal is formed 140°
STEP #3 Metal is rolled flat
Add strength and safety to every job with Hem Rolls, a productive additions to your Mittler Brothers Power-Drive Bead Roller.
Sheet metal cuts are the second most common injury suffered in the pits, paddock and shop.
Make edges - on rounded wheel-well openings as well as straight edges - stronger, safer and more professional in appearance with Hem Rolls.
This easy, three step process creates hem rolls approximately 1/4" deep. All rolls are heat-treated for lifetime service.
MADE IN THE USA
|
185.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Made in USA
|
180.00 |
|
|
These metal formers are great for making smooth radius bends in sheet metal without cutting, heating or hammering the material. Reproduce just about anything with a curved edge. Mount on a workbench, in a vise or on a stand.
Use the shrinker to contract metal and to make inside curves. Use the stretcher to expand the metal for outside curves.
Cast iron body with hardened tool steel jaws for exceptional durability and long life. Each 12-lb. unit comes completely assembled and ready to use.
Please note:
If you order optional Foot Operated Shrinker Stand (SSF2005) with this tool, we will not incude handle unless requested at the time of order.
MADE IN THE USA, by LANCASTER
|
180.00 |
|
|
John Glover has done a tremendous job of describing and illustrating techniques refined and perfected over a lifetime of unparalleled metal shaping successes in The Practical Sheet Metal Worker.
The book is divided into sections that include working the edges of metal parts, like beading, forming a wire edge and turning a flange. There is also a wealth of information on shrinking, tucking and heat shrinking. A section on making louvers is particularly helpful. The 'finishing touches' described in the book can enhance any metal shaping project, from basic to very advanced. Happily, John covers metal fabrication details and fine points in true English form - with excellent clarity and exquisite attention to detail.
Antique race cars, motorcycle gas tanks, aircraft parts and many other projects are all covered. Readers will enjoy John's perspective and personal touch along with intriguing information from days gone by. It’s full of valuable information about the hand forming of metal parts used in restoration, prototype, race and custom cars.
|
26.75 |
|
|
A necessity for Metal Workers! Ron's popular follow-up reference book to Metal Fabricator's Handbook.
INSIDE YOU WILL FIND TIPS ON: Setting up your own shop, proper use of the English wheel, basic metal shaping techniques, the art of hammerforming, proper riveting techniques, and tips on restoring original sheet metal.
Fully illustrated how-to sequences are included, along with many photos to develop sheet metal skills.
|
28.00 |
|
|
SET OF 6 LOWER ANVILS #: 2900-A-Series
CNC Machined. Quality manufactured of heat treated steel. Anvils are hard turned after heat treat for concentricity. 2-1/2" Dia x 2" Wide.
Check out the wheel (above) one of our workshop students built using these anvils!
INCLUDES:
2900-A0, FLAT anvil wheel
2900-A1, 12" Rad with 3/4" flat anvil wheel
2900-A2, 8-1/2" Rad with 1/2" flat anvil wheel
2900-A3, 5" Rad with 3/8" flat anvil wheel
2900-A4, 3-1/4" Rad with 1/4" flat anvil wheel
2900-A5, 2-3/8" Rad with 1/8" Flat anvil wheel
SAVE WHEN YOU BUY THE SET OF SIX! (Normally $95 ea.)
Made in USA
|
555.00 |
|
| |
|