|
|
Plastic Magnifier Plate, Plate Size 2 x 4-¼", Thickness 0.25
Diopters available from 0.75 to 2.25
For use with Sellstrom (Sebring) and most competitve helmets. Provides visual magnifcation to improve work quality.
Make diopter choice drop down menu. Available in 0.75 - 2.25 Diopter
#18000, SELLSTROM brand
|
5.99 |
|
|
Excellent clarity & protection now in convenient Goggle style!
Allows the user to clearly view the molten pool while welding. Perfect for gas welding and brazing, the SEBRING lens eliminates the orange glare associated with the use of flux and improves visibility ~ which improves the final weld!
Lift front plate style welding goggle.
Good choice for fitting over prescription eyewear!
FEATURES
Clear plastic lens for viewing protection when lift front is in the lifted hinged position;
Soft PVC goggle body with a snug seal;
Indirect vents on top and bottom protecting against liquids and dust while permitting indirect ventilation;
Uses standard size filter, cover, impact and magnifier plates.
|
39.99 |
|
|
OVAL PUNCH AND FLARE SET
These Mittler Brothers / Jamey Jordan Signature Series Oval Punch & Flare tools can create a unique oval shaped hole, with or without a flare in one easy step. Simply drill two pilot holes using the included template for the alignment pins, then place the tooling and material in a press. These oval punch and flare tools are precision machined from tool steel and heat-treated to a Rockwell hardness of 58 for years of use. They also feature a 16 gauge mild steel maximum capacity.
SPECIFICATIONS:
Finish Hole (inches): 1-¼ x 2, 1-¾ x 2-¾, 2 x 3-¼
Flare Height (inches): 1/4 (approximate)
Construction: heat treated steel
SET INCLUDES:
1-1/4 x 2 inch punch and flare tool
1-3/4 x 2-3/4 inch punch and flare tool
2 x 3-1/4 inch punch and flare tool
Universal press block
Material Thickness Capacity:
Aluminum (.060”)
Mild Steel (.060”)
Stainless Steel (.040”)
MADE IN USA, PART #1320-100
|
1465.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 15 inch throat, it is handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
|
155.00 |
|
|
The bullseye pick was originally designed for the collision / dent repair trade, and also works very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. With a 25 inch throat, it is handy for large panels or for a hard to reach dent. The open site gives the user a clear target for the tip to strike.
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
1 year manufacturer's warranty
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for non-US customers correctly. Thank you for your understanding.
|
165.00 |
|
|
A T dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded dolly.
Zinc plated for long life and beautiful finish, with handy 1/4" hole for storage.
Used for building tanks or forming scratch built body parts. Can be hand-held or placed in a vice.
Small: 1/2" dia. x 4" long, 11.5 oz.
MADE IN USA
|
20.76 |
|
|
A T-dolly is used to form flanges and edges by hammering (with hammer or slapper) the metal over a rounded dolly.
Zinc plated for long life and beautiful finish, with handy 1/4" hole for storage.
Used for building tanks or forming scratch built body parts. Can be hand-held or placed in a vice.
LARGE: 1" dia. x 8" long, 3 lbs.
MADE IN USA
|
32.50 |
|
|
Bulls-eye picks were originally designed for the collision / dent repair trade, and also work very well for restoration projects. In our trade, custom metal shaping & fabrication, they are ideal for the fabricator who needs to metal finish the area surrounding a weld seam on fabricated body work. This kit includes the 15 inch AND 25 inch throat models.
Bulls-eye picks are especially handy to use in hard-to-reach areas such as around gussets, braces, and other blind areas. The open site gives the user a clear target for the tip to strike, and each pick comes with a standard and blunt tip to suit your style or material.
1 year manufacturer's warranty
These bullseye picks feature quality U.S. construction throughout; including a 1/2 inch bar stock frame, comfortable foam grip, and nickel plated finish.
INCLUDES:
15 inch reach bulls-eye pick
25 inch reach bulls-eye pick
Includes Standard and blunt tips
Made in USA
International customers kindly note: due to the size of this tool, please contact us prior to order for shipping cost. Our store will NOT calculate shipping prices for international customers correctly. Thank you for your understanding.
|
295.00 |
|
|
High quality and EXTENDED THROAT make this 42" Power Drive Bead Roller a VERSATILE performer!
FEATURES INCLUDE:
Heavy Duty All Fabricated Plate Steel Construction
Powder coated for good looks and durability
Heat treated gears for long life
Oillite bushings at all rotation points for long life
Forward and Reverse switch for left or right side operation
Adjustable depth of bead
Variable speed foot control for hands free operation
MADE IN THE USA
PLEASE NOTE: This product ships via motor freight only. Shipping charges for this item will NOT be reflected in the shopping cart. You will be contacted with a shipping quote prior to shipment.
|
1800.00 |
|
|
34" High
Accomodates up to a 19" Diameter Shot Bag (sold separately)
Heavy Duty, Perfect for the Professional Heavy Welded Steel Top Plate
Hammer Storage
Weight 57 lbs.
Please note:
Tools are NOT included with stand and are shown for illustration purposes.
This item only ships within the Contiguous US. Please do not add to your cart if you are outside of this region. Thank you for your understanding.
|
230.00 |
|
| |
|